5
Moving the spot.
•
Start from Step 1 to set or select a spot a
analysis spot.
•
Press the UP, DOWN, LEFT, RIGHT arrow
on the omni selector to move the activated
spot.
•
Press Menu/Enter key to fix the position of
the spot.
Temperature reading of spot
changes in real-time.
6
Removing the spot
•
Start from Step 1 to set or select an analysis spot.
•
Press C key to remove the spot.
*E8-N has only one analysis spot; E8-TN has four analysis spots. The menu
showed in the photo of step 4 is different according to different models.
46
Quality SATIR Products Online at:
Spot NO.
GlobalTestSupply
www.
Temperature
reading
.com
sales@GlobalTestSupply.com