Satir D300 User Manual
  1. Manuals
  2. Brands
  3. Satir Manuals
  4. Thermal cameras
  5. D300
  6. User manual

Satir D300 User Manual

Mid level thermal camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Mid Level Thermal Camera
D300
User's manual
Trademark Acknowledgments
Europe (Ireland)
• SATIR is trademark of SATIR
LTD.
• Microsoft, Windows and Windows logo is either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other
countries.
•Other names and products not mentioned above may be registered
trademarks or trademarks of their respective companies.
Copyright © 2017 SATIR LTD. All rights reserved
.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the D300 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Satir D300

Summary of Contents for Satir D300

  • Page 1 • Microsoft, Windows and Windows logo is either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. •Other names and products not mentioned above may be registered trademarks or trademarks of their respective companies. Copyright © 2017 SATIR LTD. All rights reserved...
  • Page 2 About this IR Camera User Guide Symbols Used This mark denotes issues that may affect the IR camera’s operation. This mark denotes additional topics that complement the basic operation procedures.  What do the icons listed in the Camera User Guide mean? Information displayed on the LCD Monitor (p.13)
  • Page 3 Thumb Index Introduction of camera components. Preparing the IR Camera Describes basic functions, learning how to turn on/off the IR camera and work with the control panel Basic function and LCD monitor. Describes working with the camera, from each Shooting analysis settings to using the camera’s various analysis tools.
  • Page 4 You must read this section before connecting your camera to a computer.

  • Page 5: Table Of Contents

    Table of Contents Read This First ....................8 Component Guide ..................13 Front View ....................13 Back /Bottom View ................. 14 Preparing the IR Camera ................15 Charging the Device ................15 Turning the Power On / Off ..............16 Checking the Information on the LCD Monitor ......
  • Page 6 IR Camera Adjustment ................34 Focus....................34 Display Modes ................. 36 Image adjustment ................41 Palette settings ................45 Shutter automatically ..............47 Turning the LED and Laser on/off ..........48 Laser ranging .................. 50 USB Mode Setting ................52 Setting the multifunction key ............
  • Page 7 Saving the Image ..................79 Attaching Voice Memos Images ............80 Voice recording ................80 Snapshot and Edit the image .............. 82 Record/Replay the Video..............84 Playback and Erase ..................86 Opening Images ..................86 File Manager .................... 89 Connection and Download ................91 Download the images................

  • Page 8: Read This First

    IR camera is operating and being operated correctly. Please note that SATIR, its subsidiaries and affiliates, and its distributors are not liable for any consequential damages arising from any malfunction of an IR camera or accessory that results in the failure of an image to be recorded or to be recorded in a format that is machine readable.
  • Page 9 Warnings Read on to learn about using IR camera properly. Avoid damaging eyesight Warning: Do not trigger the laser pointer in human or animal eyes. Exposure to the laser produced by the laser pointer may damage eyesight. Do not disassemble Do not attempt to disassemble or alter any part of the equipment that is not expressly described this guide.
  • Page 10 Do not use substances containing alcohol, benzene, thinners or other flammable substances to clean or maintain the IR camera The use of these substances may lead to fire. Remove the power cord on a regular periodic basis and wipe away the dust and dirt that collects on the plug, the exterior of the power outlet and the surrounding area In dust, humid or greasy environments, the dust that collects around the plug over long periods of time may become saturated with humidity...
  • Page 11 Use only recommended accessories Disconnect the compact power adapter from both the IR camera and power outlet after recharging and when the IR camera is not in use to avoid fires and other hazards Continuous use over a long period of time may cause the unit to overheat and distort, resulting in fire.
  • Page 12 Continue to use may damage the IR camera. Remove the PC card, and a household power source, from the IR camera and wait until moisture evaporates completely before resuming use. Right Reserved SATIR reserves the right to change the functions and configurations of our products without prior notice.

  • Page 13: Component Guide

    Component Guide Front View LCD Display Illuminator Visual camera Visual camera IR lens Laser pointer Battery pack cover Definable trigger...

  • Page 14: Back /Bottom View

    Component Guide Back /Bottom View Power switch Power indicator Focus Freeze/Activate Auto adjust Cancel Type-C Video output...

  • Page 15: Preparing The Ir Camera

    Preparing the IR Camera Charging the Device Device has built in battery, when Low battery status symbols display in LCD, Please follow the steps below to charge the device Battery Status Symbols The following icons indicate the battery status on the LCD display. Sufficient battery charge Low battery Recharge the device...

  • Page 16: Turning The Power On / Off

    Preparing the IR Camera Turning the Power On / Off The power indicator is lit while the power of the camera is on. Holding the camera correctly with your right hand, put your thumb above the key pad and put your forefinger in front of the definable trigger.
  • Page 17 After a while, a startup image will appear on the screen. Turn off the camera. Hold the power switch for 3 seconds. • The power indicator goes off.

  • Page 18: Checking The Information On The Lcd Monitor

    Preparing the IR Camera Checking the Information on the LCD Monitor The LCD monitor has a field of vision of 100% of the actual shooting image. The following displays in information view. Main interface...
  • Page 19 Explanation： Power display Temperature unit；Emissivity；Distance；Time Span(Click to modify) Color scale Level(Click to modify) SATIR trademark(Click to bring up the main menu) Quick launcher (Click to bring up the shortcut menu)

  • Page 20: Setting The Date And Time

    Preparing the IR Camera Setting the date and time You need to set the Data / Time when the IR camera is turned on for the first time. Press the [C] key or click the icon. Press the DOWN arrow on the omni selector to select the [Settings] menu and press OK key.
  • Page 21 Setting date: • Slide up and down the date item to modify the date; • After modifying click [OK] button to save, click [Cancel] button to abandon changes. Setting time: • Slide up and down the time item to modify the time; •...

  • Page 22: Local Settings

    Preparing the IR Camera Local Settings In this menu item, you can set style of the built-in menu system. Language setting Press the [C] key or click the icon. Press the DOWN arrow on the omni on the selector to select [Settings] menu and press OK key.
  • Page 23 Local setup: • Slide up and down to select a item to change; • After modifying click [OK] button to save, click [Cancel] button to abandon changes. About the system settings Language Select the language of the menus and messages. update / backup / recovery thermal imager Update operating system...

  • Page 24: Unit Setting

    Preparing the IR Camera Local Settings Unit setting Press the [C] key or click the icon. Press the DOWN arrow on the omni selector to select [Settings], then press the OK key. Press the DOWN or UP arrow on the omni selector to select [System] then click [Unit Setting].

  • Page 25: Tv-Out Modes Setting

    Preparing the IR Camera Local Settings TV-OUT modes Setting Press the [C] key or click the icon. Press the DOWN arrow on the omni selector to select [Settings] then press OK key. Press the UP or DOWN arrow on the omni selector to select [System] then click [Control].
  • Page 26 Click the RIGHT area of [TV-OUT] item to open TV-OUT after linked to your PC and click [TV-OUT Mode] to select a mode. Slide to select NTSC or PAL mode.

  • Page 27: Quicklauncher Setting

    Preparing the IR Camera Local Settings QuickLauncher Setting Press the [C] key or click the icon. Press the DOWN arrow on the omni selector to select [Settings] then press OK key. Press the UP or DOWN arrow on the omni selector to select [Image] then press OK...
  • Page 28 Click the RIGHT area of [QuickLaucher] item to call QuickLaucher. Click again to cancel QuickLaucher Click QuickLaucher icon .The shortcut menu will appear on right area of the screen...

  • Page 29: Basic Functions

    Basic Functions Using the LCD Monitor Using the LCD Monitor If you wish to use the LCD monitor for shooting, playing back thermal images and adjusting menu settings, follow the instructions below. Open the LCD displayer in the direction of the arrow. Aim the IR camera at a subject.

  • Page 30: Selecting Menus And Settings

    Basic Functions Selecting Menus and Settings You can select the settings by pressing the OK key. Press the [C] key. Press the LEFT or RIGHT arrow on the omni selector. Press the UP or DOWN arrow on the omni selector. Press the OK button.
  • Page 31 Main menu Analysis(Spot / Area / Line tool and ISO) Images(Image mode / Palette / Adjust ) Media(Snapshot / Edit / Voice record / Video record / Replay) File(Scan file and thermal images) Settings(Analysis setting / System setting / Image setting / Bluetooth / System info)

  • Page 32: Resetting The Settings To Default

    Basic Functions Resetting the Settings to Default You can reset the menu and button operation settings to default. Press the [C] key or click the icon. Press the DOWN arrow keys select [Settings],then press the OK key. Press the down arrow select [System Info],then...
  • Page 33 After factory defaults, for the user data already stored in the internal memory which will delete all the settings are reset, and the external memory with the user data will not be deleted.

  • Page 34: Shooting

    Shooting IR Camera Adjustment Focus Focus and digital zoom Aim that the IR camera at the subject.
  • Page 35 a. Press [F] key ,[F] key will turn blue to green which means device focusable b. Press UP or DOWN arrow focus(manual focus) or press the LEFT arrow to focus (auto focus) Do not stop turning until the image is clear. You can press LEFT +UP/DOWN to realize the digital zoom.

  • Page 36: Display Modes

    Shooting IR Camera Adjustment Display Modes DuoVision Display modes Thermal, Visual and DuoVision image display This IR camera records visual images with its built-in digital camera. You can capture a visual image as a reference to the thermal image. Click the icon .How to call QuickLauncher reference p21 In the pop-up menu, click [IR] to switch the corresponding display...
  • Page 37 In the pop-up menu, click [Merg] to switch the corresponding display mode. Click position beyond pop-up menu can hide pop-up menu...
  • Page 38 Shooting IR Camera Adjustment In DuoVision display mode, you can see the thermal images ‘fuse’ into the visible images. In this mode, you can use the analysis tools to analyze the target. But what you see is the image with pseudo color.
  • Page 39 Merg In this mode, you can see the background image is full color visible image. And the thermal image ‘fuses’ on it in the center square. At the same time you can use any analysis tools to analyze the target. In the integration mode, you can click [position], by moving your finger up and down to adjust the position of the visible picture infrared and visible light images of harmony.
  • Page 40 About the IR/Visible settings Sets the ratio of IR images and Visual images. The Percentage value is from 1% to 100%. The items above are activated only in [Duo-Vision] mode.

  • Page 41: Image Adjustment

    Shooting IR Camera Adjustment Image adjustment You can adjust the Level (brightness) and Span (contrast) of the image captured by IR camera, manually or automatically. Auto adjustment Press the [C] key or click the icon. Press the UP or DOWN arrow on the omni selector to select [Image] then press OK key.
  • Page 42 Press the UP arrow on the omni selector to select [Adjust] then press OK Slide up and down the item to select the Adjust Mode to be Auto , then click [Apply] The IR camera will automatically adjust the brightness and / or contrast and calibrate when you press the A key.
  • Page 43 Shooting IR Camera Adjustment Manual Adjustment Set device adjust mode to Manual. How to set pleas e reference P34 Level Click the right showed area of the main interface like the picture to call the Span level or Span adjustment menu.
  • Page 44 Click the number below color scale a. Slide select value of the Min Temp and click [close] to save it.

  • Page 45: Palette Settings

    Shooting IR Camera Adjustment Palette settings Press the [C] key or click the icon. Press the UP or DOWN arrow on the omni selector to select the [Image], press the OK key to call the image toolbar. Click [Palette].
  • Page 46 Slide to select the palette mode and then click [close] to finish the setting. The camera provides 6 kinds of palettes: Iron, Iron inverted, Rainbow, Feather, Grey and Grey inverted.

  • Page 47: Shutter Automatically

    Shooting IR Camera Adjustment Shutter automatically Press the [C] key or click the icon. Press the DOWN arrow on the omni selector to select [Settings] and then press OK key. Press the DOWN arrow on the omni selector to select [Image] then click [Shutter Interval].

  • Page 48: Turning The Led And Laser On/Off

    Shooting IR Camera Adjustment Turning the LED and Laser on/off Warning: Do not trigger the laser pointer in human or animal eyes. Exposure to the laser produced by the laser pointer may damage eyesight. Press the [C] key or click the icon.
  • Page 49 Click the right area of the list to open the LED and laser. Click again can close the tools. About Control Click to open and press the UP and DOWN TV-OUT arrow on the omni selector to close. TV-OUT Mode Slide to select the NTSC or PAL mode.

  • Page 50: Laser Ranging

    Shooting IR Camera Adjustment Laser ranging Warning: Do not trigger the laser pointer in human or animal eyes. Exposure to the laser produced by the laser pointer may damage eyesight. Press the [C] key or click the icon. Press the DOWN arrow on the omni selector to select [Settings] then press the OK key.
  • Page 51 Click the right area of the list to open the laser. Click again can close the tool. Click [Multi-Fucn Key], Slide up and down the item to select [LaserDist] and then click [Done] Align the object to be measured, press the multi-function keys, number in the bottom right of the screen (right of the time)

  • Page 52: Usb Mode Setting

    Shooting IR Camera Adjustment USB Mode Setting Press the [C] key or click the icon. Press the DOWN arrow on the omni selector to select [Settings] then press the OK key. Press the DOWN arrow on the omni selector to select [System] and click [Control], slide UP the list and click [USB Mode].

  • Page 53: Setting The Multifunction Key

    Shooting IR Camera Adjustment You can set the multifunction key with different functions such as shutter , freeze and snapshot through the system. Setting the multifunction key Press the [C] key or click the icon. Press the UP or DOWN arrow on the omni selector to select [Settings] menu , then press the OK key.
  • Page 54 Press the UP or DOWN arrow on the omni selector to select the [System] ,then press the [Control]. Click [Multi-function key] option, slide up and down to Edit menu, click [Finish] to save the changes and exit the menu.
  • Page 55 About the function of multifunction key The machine will shutter one time by pressing the Shutter multifunction key. You can activate / freeze a thermal image by Freeze pressing the multifunction key. Snapshot Save the image by pressing the multifunction key. Laser Open laser by pressing the multifunction key Operate measuring distance by pressing the...

  • Page 56: Bluetooth Setting

    Shooting IR Camera Adjustment Bluetooth setting Press the [C] key or click the icon. Press the DOWN arrow on the omni selector to select [Settings], then press the ok key. Press the DOWN arrow on the omni selector to select the [System] then slide UP and click [Bluetooth].

  • Page 57: Measurement Range

    Shooting IR Camera Adjustment Measurement range Press the [C] key or click the icon. Press DOWN arrow on the omni selector to select the [Settings] then press the OK key. Press the UP arrow on the omni selector to select the [Analysis] then click the [Temp.
  • Page 58 Click the number to select the right range and click [OK] to finish the settings. Then press the [C] key to back to the main interface. The camera offers three Temp. Range： -20~150℃,140~600℃...

  • Page 59: Freezing / Activating An Image

    Shooting IR Camera Adjustment Freezing / Activating an image You can activate / freeze a thermal image by pressing the S key on the keypad. Press the [S] key, then the image is freezing. Press the [S ] key again then the image is active.

  • Page 60: Checking The Emissivity Table

    Shooting IR Camera Adjustment Checking the emissivity table Press the [C] key or click the icon. Press the DOWN arrow on the omni selector to select [Settings] then press the OK key. Press UP arrow on the omni selector select [Analysis], then click [Emiss Table].

  • Page 61: Fulfill The Analysis Function

    Shooting Fulfill the Analysis Function Setting object/global settings Press the [C] key or click the icon. Press the DOWN arrow on the omni selector to select [Settings] then press the ok key. Press the UP arrow on the omni selector to select the [Analysis] then click the [Global Param.].
  • Page 62 Setting analysis parameter • Press the UP or DOWN arrow on the omni selector to select an item to change. Press the LEFT or RIGHT • arrow on the omni selector to set the values. Click [Save] to save the settings.
  • Page 63 About the analysis parameters Selects the object of which you want to set Object the parameters. Different material has different emissivity. Use different emissivity to measure different Emissivity material. Different object has different distance to the Distance IR camera. Use different distance to measure different object.

  • Page 64: Reset The Default Settings

    Shooting Fulfill the Analysis Function Reset the default settings Press the [C] key or click the icon. Press the DOWN arrow on the omni selector to select [Settings] then press Ok key. Press the DOWN arrow on the omni selector to select [Analysis] and click [Reset].

  • Page 65: Setting Analysis Tools

    Shooting Fulfill the Analysis Function Setting analysis tools This topic briefly explains how to set the analysis tools on the thermal image. Spot analysis Press the [C] key or click the icon. Press the UP or DOWN arrow on the omni selector to select the [Analyze] then press ok...
  • Page 66 Press the UP or DOWN arrow on the omni selector to select the [Spot] then press ok key or click icon. Setting the spot analysis. • Press the arrow keys and choose a spot, then press the ok key or double click spot •...
  • Page 67 Moving the spot. • Click spot. Spot turn to green • Press the UP, DOWN, LEFT, RIGHT arrow on the omni selector to move the spot or drag spot to target location Removing the spot. • Keep pressing the spot you want to remove ,then you will find a ashcan appears on the screen .Drag the spot into the trashcan to clear it.

  • Page 68: Area Analysis

    Shooting Fulfill the Analysis Function Area analysis Press the [C] key or click the icon Press the UP or DOWN arrow on the omni selector to select the [Analyze] then press ok key Press the UP or DOWN arrow on the omni selector to select the [Area] then press ok key or click icon.
  • Page 69 Moving the area. • Select the area you want to move by click the area. • One way： Press the UP, DOWN, LEFT, RIGHT arrow on the omni selector to move the area. The other way：press anywhere of the area you want to move and drag it to anywhere Removing the area.
  • Page 70 About changing the shape of the analysis area. Original Final Original Final LEFT andUP RIGHT and UP LEFT and DOWN RIGHT and DOWN arrow Original Final Original Final...
  • Page 71 Shooting Fulfill the Analysis Function *Line analysis Press the [C] key or click the icon. Press the UP or DOWN arrow on the omni selector to select [Analyze] then press ok key Press the UP or DOWN arrow on the omni selector to select [Line] then press ok key or click icon.
  • Page 72 Removing the line. Keep pressing the inverted • triangle that on the line ,then you will find a ashcan appears on the screen. Drag the inverted triangle into trashcan to clear it .

  • Page 73: Isotherm Analysis

    Shooting Fulfill the Analysis Function *Isotherm analysis Press the [C] key or click the icon. Press the UP or DOWN arrow on the omni selector to select [Analyze] then press ok key Press the UP or DOWN arrow on the omni selector to select [ISO] then press ok key or click icon.
  • Page 74 About the ISO mode Use the same color to indicate the Under Below isothermal zone and below the lower limit of the isothermal zone. Use the same color to indicate the Over Above isothermal zone and above the upper range of the isotherm.

  • Page 75: Setting The Alarm Temperature

    Shooting Fulfill the Analysis Function Setting the Alarm temperature Press the [C] key or click the icon. Add a analyze spot tool, then press the OK key again or double click spot to call the setting window of the spot. Press UP or DOWN arrow on the omni selector to select [Alarm...

  • Page 76: Setting The Comparing Temperature

    Shooting Fulfill the Analysis Function Setting the comparing temperature Press the [C] key or click the icon Add a area analysis tools. Press the [C] key. Press DOWN arrow to select [Settings] and press the OK key. Select [Analysis] and click [Comp.
  • Page 77 Press the [C] key twice to back to the main interface. Press the [C] key again to hide the menu. You can see the values of difference beside ‘Comp:’ on downer right area of the screen.

  • Page 78: Remove Analysis Tools

    Shooting Fulfill the Analysis Function Remove analysis tools this This topic briefly explains how to remove analysis tools you place on the screen. Click the icon on the screen. How to call shortcut tool , reference p21 In the pop-up menu bar on the right side click [Clear] key to clear all the analysis tools.

  • Page 79: Saving The Image

    Shooting Saving the Image After you freeze an image, you can Click the icon on the screen In the pop-up menu bar on the right side, click [snapshot] key to save the image , or you also can save the image with the next steps. Press the [C] key or click the icon.

  • Page 80: Attaching Voice Memos Images

    Shooting Attaching Voice Memos Images You can introduce an image with voice recording. Voice recording Install the Bluetooth headset. Press the C key, then Press the UP or DOWN arrow on the omni selector to select the [Media] menu, then press the OK key.
  • Page 81 The storage capacity of the memory will not decrease when you attach voice comment to an image.

  • Page 82: Snapshot And Edit The Image

    Shooting Snapshot and Edit the image Snapshot/Edit Press the [C] key or click the icon. Press the UP or DOWN arrow on the omni selector to select the [Media] then press the OK key. Press the UP or DOWN arrow on the omni selector to select [Snapshot] press the OK key then the...
  • Page 83 About the Media Snapshot： Select and press the OK key to capture the present image. Edit：Edit the captured image. Voice：Record voice for the image. Video：Record a video. Replay：Replay the record video.

  • Page 84: Record/Replay The Video

    Shooting Record/Replay the Video Record/Replay the Video Press the [C] key or click the icon. Press the UP or DOWN arrow on the omni selector to select the [Media], then press the OK key. Press the UP or DOWN arrow on the omni selector to select the [Video] and press the OK key to...
  • Page 85 Press the UP or DOWN arrow on the omni selector to select [Replay] and press the OK key to replay the recorded video. Press the [C] key to exit after replaying. About the Replay toolbar Play or pause the playing. Play：...

  • Page 86: Playback And Erase

    Playback and Erase Opening Images You can view and analyze the recorded images on the LCD monitor. Press the [C] key or click the icon. Press the UP or DOWN arrow on the omni selector to select [Media] and press the OK key.
  • Page 87 Photo edit sub menu description Analysis（Analysis tools can be used to analyze the heat images） Delete（Delete the currently selected picture） Slideshow（All current picture slideshow） Full screen Text Note（Add text notes for the current picture） Record（Add voice notes to the current picture）...
  • Page 88 Selecting the file path Press the [C] key or click the icon. Press the UP or DOWN arrow on the omni selector to select the [File], then press the OK key. Press the UP or DOWN arrow on the omni selector to select the [SD Card] option (save files in SD Card),select...

  • Page 89: File Manager

    Playback and Erase File Manager File manager Press the [C] key or click the icon. Press UP or DOWN arrow on the omni selector to select [File] then press the OK key. Press UP or DOWN arrow on the omni selector to select file or tool, press the [C] key to shift file to tool.
  • Page 90 About the File manager Home（Enter the home directory） Previous（Back to the parent directory） Remove（Remove the file or directory） Rename（Rename the file or folder） New（Build a directory） Copy（Copy the file） Paste（Paste the file） Refresh(Refresh the file list) Save Folder(Setting the saving path) Close(Close file manager)

  • Page 91: Connection And Download

    Connection and Download Download the images Open the USB / Video cover on the button of device Use USB cable connect device to computer then modify device USB Mode to UDisk Copy images and videos to your computer...

  • Page 92: Connecting To A Monitor

    Connection and Download Connecting to a monitor A video-compatible monitor connected via the video cable (supplied) can be used to view and analyze images you shoot. Attach video cable to the video out terminal on bottom of camera. Plug the other end of the video To the video in jack cable to the video in jack on the monitor.

  • Page 93: Connecting To A Computer

    Connection and Download Connecting to a computer Connection Connect the USB cable to the computer’s USB port and the multi-functional dock’s terminal. • You do not need to turn off the computer or camera when making this connection. • Please refer to your computer manual for information regarding the location of the USB port...

  • Page 94: Real-Time Transfer

    Connection and Download Real-time transfer You can analyze and save the thermal video in computer directly via the USB by the optional real-time software. Power on the camera。 Connect the camera and computer via USB cable, p.59. operating system will recognize camera automatically.
  • Page 95 Connection and Download Real-time transfer Troubles shooting When you have any problems in the process of connecting the IR camera to a computer to use optional real-time software, check this first. First, Check the Following 1. Does your computer comply with these requirements? Ensure the system has a built-in USB port.

  • Page 96: Use The Bluetooth Headset

    Connection and Download Use the Bluetooth headset Follow the steps to install the Bluetooth headset for the first time. Turn on the camera and Bluetooth headset. Turn on the Bluetooth headset first. Press and hold the power button about 10 seconds.

  • Page 97: Troubles Shooting

    Troubles Shooting Problem Cause Solution Camera will Power is not turned on • Turn on the camera. See not operate Turning the Power On / Off (p.12). Insufficient battery voltage • Fully charge the battery. Camera will Internal memory is full •...

  • Page 98: Appendix

    Appendix How to setup for optional Lens There are various lenses for D300 available, from tele-lens to close-up lens. When an optional lens is installed, please enter “Manual Adj.” to setup the correct mode for lens: Select “Temp Range Filter”, then press directional keys “UP”+”DOWN”...

  • Page 99: Camera Care And Maintenance

    Appendix Camera Care and Maintenance Use the following procedures to clean the camera body, lens, LCD monitor and other parts. Wipe the body clean with soft cloth or eyeglass Camera Body lens wiper. First use a lens blower to remove dust and dirt, then remove any remaining dirt by wiping the lens lightly with soft cloth.

  • Page 100: Emissivity Table

    Appendix Emissivity table Emissivity Material Temperature（°C） approximation Metal Aluminum Polished aluminum 0.09 Commercial aluminum 0.09 foil Electrolytic 25～600 0.55 chromeplate alumina Mild alumina 25 ~ 600 0.10 ~ 0.20 Strong alumina 25 ~ 600 0.30 ~ 0.40 Brass Brass mirror (highly 0.03 polished) Brass oxide...
  • Page 101 Appendix Emissivity table (continue) Emissivity Material Temperature（°C） approximation Polished cast iron 0.21 Processed cast iron 0.44 Polished tempered 40 ~ 250 0.28 Iron Polished steel ingot 770 ~ 1040 0.52 ~ 0.56 Raw welded steel 945 ~ 1100 0.52 ~ 0.61 Surface ferric oxide 0.69 Completely rusty...
  • Page 102 Appendix Emissivity table (continue) Emissivity Material Temperature（°C） approximation Lead Pure lead (Non- 125～225 0.06～0.08 oxidization) Mildly oxidized 25 ~300 0.20 ~ 0.45 Magnesium Magnesia 275 ~ 825 0.55 ~ 0.20 Magnesia 900 ~ 1670 0.20 0 ~ 100 0.90 ~ 0.12 Nickel Electroplate polishing 0.05...
  • Page 103 Appendix Emissivity table (continue) Emissivity Material Temperature（°C） approximation Stainless steel 18-8 0.16 304(8Cr,18Ni) 215 ~ 490 0.44 ~ 0.36 310(25Cr,20Ni) 215 ~ 520 0.99 ~ 0.97 Commercial tin plate 0.07 Strong oxidization 0 ~ 200 0.60 Zinc Oxidizing at 400°C 0.01 galvanized shining 0.23...
  • Page 104 Appendix Emissivity table (continue) Emissivity Material Temperature（°C） approximation Carbon piece 0.85 Isolation piece 0.91～0.94 Sheet metal 0.88 ~ 0.90 Glass pipe 0.90 Loop type 0.87 Porcelain enamel 0.90 products Porcelain enamel 0.83～0.95 designs Solid materials 0.80 ~ 0.93 Ceramics (vase type) 0.90 Film 0.90 ~ 0.93...
  • Page 105 Appendix Emissivity table (continue) Emissivity Material Temperature（°C） approximation Electric materials Epoxy glass plate 0.86 Epoxy 0.80 hydroxybenzene plate Gilded sheet copper 0.30 Solder-coated copper 0.35 Tin-coated lead wire 0.28 Brass wires 0.87 ~ 0.88 Block talcum terminal 0.87...

  • Page 106: Specification

    Specification All data is based on SATIR’s testing standard. Subject to change without notice. Type D300 Image performance FOV/Min.focus distance 24° x18°/0.20m Spatial resolution 1.3 mrad ≤0.05°C@30°C Thermal sensitivity UFPA Detector type Resolution 384 x288 Spectral range 8-14um Focus Manual/Motor/Auto...
  • Page 107 8 movable spots, auto hot/cold spot, profile, 2 area Measurement mode boxes, isotherm, line Emissivity, ambient temperature, distance, relative Correction humidity, reflected temperature Alarm Image storage Type 16GB File format .JPG(thermal/Visual) Annotation Voice, note annotation Power system Battery type Built-in rechargeable lithium-ion battery Charge interface Type-C Battery operating time...
  • Page 108 Tripod mounting 1/4"_20 Additional features Illuminator Laser pointer Built-in memory Video record USB port , Analog video output Ports Bluetooth Available optional lenses 7°, 12°, 48°...

Table of Contents