Satir E8-N User Manual page 40

5
After this operation, press the MENU/ENTER key to save
changes, or press the C key to go back to the upper
menu.without saving.
About the analysis parameters
Distance
Amb Temp
Humidity
Comp Obj
Ref Temp
The reading of Comp. Obj
40
Quality SATIR Products Online at:
Selects the object of which you want to set
Object
the parameters.
Different material has different emissivity.
Emiss Use different emissivity to measure different
material.
Different object has different distance to the
IR camera. Use different distance to
measure different object.
Input ambient temperature.
Input ambient humidity.
Comp Obj1 can be set as any spot and
area; Comp Obj2 can be set as ref. temp.
and any spot and area.Differential of their
temperature will be showed at the right
bottom corner of the screen.
For example, Comp Obj1 is Spot1(35.4℃)
and Comp Obj2 is Ref Temp(30℃)，then the
final reading will be 5.4℃.
Sets a reference temperature to compare
with the spot/area/profile tool.
www.
GlobalTestSupply
.com
sales@GlobalTestSupply.com