Satir E8-N User Manual page 44

*Isotherm
Type
*Isotherm
Alert
*Temperature alert and isotherm settings are only for E8-TN and E8-GN.
44
Quality SATIR Products Online at:
Sets the isothermal analysis mode. There are five
modes: Dual Above, Dual Below, Above, Below and
Interval.
Display the isothermal interval in a
color and the parts with the higher
Dual
temperatures than the upper limit of
Above
the isothermal interval in a different
color
Display the isothermal interval in a
color and the parts with the lower
Dual
temperatures than the lower limit of
Below
the isothermal interval in a different
color
Display the isothermal interval and
the parts with the higher temperature
Above
than the upper limit of the isothermal
interval in the same color
Display the isothermal interval and
the parts with the lower temperature
Below
than the lower limit of the isothermal
interval in the same color
Display the isothermal interval in one
color and all the other parts are
Interval
displayed in the normal pseudocolor
mode
The value is from 1 to 255, and it means 1/255 to
255/255 of the screen. For example, if the span of
isotherm is 35℃ to 40℃ and the isotherm alert is
100. If the proportion of isotherm area between
35℃ to 40℃ is over 100/255, alarm will ring.
GlobalTestSupply
www. .com
sales@GlobalTestSupply.com