Satir E8-N User Manual page 43

About the analysis settings
*Alert
*Alert Temp
Correct
Temp
Saturation
Color
*Isotherm
Width
*Isotherm
Color
Quality SATIR Products Online at:
There are two kinds of temp-alert:
Upper-limit alert and Lower-limit alert.
1.Upper-limit alert
Set item "alert" as [on],and "Capture spot" as
[maximum],then spot analysis tool "max sp10" will
automatically capture the hottest spot within the
screen, if this temperature is higher than the value
you set in "alert temp",the reading on top-right
screen will turn into RED,and also sound of beepin.
2.Lower-limit alert
Set item "alert" as [on],and "Capture spot" as
[minimum],then spot analysistool "mini sp10" will
automatically capture the coldest temperature
within the screen,if this temperature is lower than
the value you set in "alert temp",the reading on
top-right screen will turn into RED,and also sound
of beepin.
Note:select spot
max.]&[capture min.] in menu"Analysis".
Sets the temperature limit of "Alert".
Corrects the measured temperature value of the
camera to ensure the measurement accuracy
under special circumstances.
When it's on, Green will take place of the color that
stands for the highest temperature.
Sets the width of isothermal interval. The width can
be adjusted from 0.1℃ to the upper limit of the
maximum temperature measurement range under
this condition.
Sets the color of the isotherm interval. Transparent,
Green, Black and White are available.
GlobalTestSupply
www.
analysis tools
.com
[capture
43
sales@GlobalTestSupply.com