Security Menu - Kontron KTGM45/mITX User Manual

KTD-N0793-L
7.6

Security Menu

Main Advanced
Security Settings
Supervisor Password :Not Installed
User Password
Change Supervisor Password
Change User Password
Boot Sector Virus Protection
Hard Disk Security
Primary Master HDD User Password
Primary Slave HDD User Password
Secondary Slave HDD User Password
v02.67+ (C)Copyright 1985-2009, American Megatrends, Inc.
Feature
Change Supervisor Password
User Access Level
Change User Password
Password Check
Boot Sector Virus Protection
HDD Password
Page 90
BIOS SETUP UTILITY
PCIPnP Boot
:Not Installed
[Disabled]
Options
Password
Full Access
View Only
Limited
No Access
Password
Setup
Always
Enabled
Disabled
Password
Security Chipset
Install or Change the
password.
<->
||
Enter Go to Sub Screen
F1
F10
ESC
Description
When not cleared the advanced Supervisor
Password protection system is enabled (see below
diagram). Hereafter setting can only be accessed
when entering BIOS as Supervisor.
Only visible if Supervisor Password is installed.
Full Access: User can change all BIOS settings.
View Only: User can only read BIOS settings.
Limited: User can only read settings except: Date &
Time, Quick Boot, Quiet Boot, Repost Video on S3
Resume, Active State Power-Management and
Remote Access.
No Access: User can not enter BIOS, but if
Password Check = Always then User password will
allow boot.
Change the User Password
Only visible if Password is installed.
Setup: Protects only BIOS settings.
Always: Protects both BIOS settings and Boot.
Will write protect the MBR when the BIOS is used to
access the harddrive
Locks the HDD with a password, the user needs to
type the password on power on
KTGM45 Users Guide
BIOS setup
Exit
Select Screen
Select Item
General Help
Save and Exit
Exit