Siemens Gigaset M 101 Data Operating Instructions Manual page 28

Tips & tricks, settings
28
You will find maximum speed setting in the Modem tab; this
should be set to 115,200 bps.
Activate Hardware under Use flow control in the Settings -
Advanced tab. Click OK to exit each window.
3. Test the baud rate setting
Open the direct cable connection program via
Start Programs
>
If this icon is missing, you may have to reinstall the appro-
priate software from the Win 95 system CD.
This can be done by selecting Control Panel, Add/Remove
Programs, Windows Setup, Communications, Details, Di-
rect Cable Connection.
Accessories.
>