Connecting Stations - Siemens Gigaset M 101 Data Operating Instructions Manual

Putting into service

Connecting stations

10
To avoid damaging your Gigaset M101 Data and the PC, the
V.24/RS232 cable should only be connected when the pow-
er supply is switched off.
Connect a Gigaset M101 Data to the V.24/RS232 interface
of the PC (COM port). Some V.24 plugs have a plastic pro-
trusion and cannot be properly arrested. If this is the case,
use the cable supplied as an extension.
Connect both stations to the plug-type AC adapters
(C39280-Z4-C59/C39280-Z4-C168) and insert these adapt-
ers in 230 V AC 50 Hz sockets.
You can now perform initial configuration, see "Initial configura-
tion" on page 11.