De-Registering A Extension Station; Partner Station" Tab; Changing The Name; Changing The Pin - Siemens Gigaset M 101 Data Operating Instructions Manual

Configuration program options
De-registering a Teilnehmer station

"Partner station" tab

Changing the name

Changing the PIN

18
The Teilnehmer station now searches for the Basis station and
automatically registers at it.
If registration is not possible (Basis station not in "logon mode"
or not powered, incorrect PIN), the system will indicate the nec-
essary steps for resolving this problem.
De-registration is only possible by resetting the Gigaset M101
Data unit to the factory default, see "Resetting the device to the
factory default" on page 19.
This tab is used for configuring the Partnerstation that is not
connected to the PC. The registration must be performed first
so that the two Gigaset M101 Data devices can communicate:
the "Partner station" tab only becomes operational after registra-
tion on the "Local station" tab.
As for lokalen Station, see "Changing a name" on page 15.
Check whether the correct station is addressed. Only Basis sta-
tions have PINs.
Click Change PIN...
Enter the old PIN to obtain authorization to change the PIN and
press the tab key.
Enter the new PIN and press the tab key.
Enter the new PIN in the confirmation field and click OK.
The PIN is changed if the new PINs entered are identical and if
the correct old PIN is entered. Otherwise, a warning appears..