Table of Contents
Advertisement
Status LEDs
LED
PWR
10Base-T/100Base-TX Ethernet Port
LINK/
ACT
100M
Coaxial VDSL LINE Port
SCBR/
PROV
LINK
RATE
The AT-MC606 VDSL Network Extender features the status LEDs and are
defined in Table 3.
Table 3. Front Panel Status LEDs
Color
GREEN
Power is applied to the unit.
OFF
Power is not applied to the unit.
Solid GREEN
A link has been established on the port.
Blinking GREEN
Network traffic is being transmitted and/or received.
OFF
A link has not been established.
Solid GREEN
Port is linked at 100 Mbps.
OFF
Port is linked at 10 Mbps when LINK/ACT LED is solid or
blinking GREEN.
Solid GREEN
Unit is configured as a Subscriber Unit (SCBR).
OFF
Unit is configured as a Provider Unit (PROV).
Slow Blinking
VDSL is idle when blinking occurs approximately
GREEN
1 time/second.
Fast Blinking
VDSL is in the training or handshake mode when the blinking
GREEN
occurs approximately 3 times/second.
Solid GREEN
VDSL has established a connection with its link partner.
Rapid Blinking
VDSL activity is occurring when the blinking occurs
GREEN
approximately 6 times/second.
OFF
VDSL link is not established.
After a VDSL link is established, the Rate LED indicates the
data rate being received on the BNC port. It will continuously
Blinking GREEN
blink a set number of times in a set time interval. Each "blink"
represents approximately 10 Mbps of VDSL line rate (e.g.,
six "blinks" represents a VDSL line rate of 60 Mbps). The
data rates on both the Provider unit and Subscriber unit are
approximately the same when configured for the SYM
(symmetrical) mode and differ significantly when both are
configured for the ASYM (asymmetrical) mode. See"VDSL
Configuration DIP Switches" on page 22 for more
information.
AT-MC606 VDSL Network Extender Installation Guide
Description
21
Advertisement
Table of Contents
