Chapter 1: Summary Of Features; Figure 1. At-Mc606 Front Panel - Allied Telesis AT-MC606 Installation Manual

Overview
Summary of Features
16
The AT-MC606 VDSL Network Extender using coaxial cable provides the
following features:
Extend Ethernet over shielded coaxial cable using VDSL (Very high-
bit-rate Digital Subscriber) protocol
10Base-T/100Base-TX Ethernet port with an RJ-45 connector
– Auto MDI/MDI-X on Ethernet port
– Auto-Negotiation for speed and duplex mode
(IEEE 803.3u-compliant)
VDSL BNC coaxial connector
– Fast and Interleaved mode latency configurations
– Symmetrical and asymmetrical transmit/receive
configurations
– Signal-to-Noise settings for different coaxial line lengths
Status LEDs for both 10Base-T/100Base-TX and VDSL Line ports
12V DC external power supply input port
Installation on desktop, wall, DINRAIL, or rack mounting in an
AT-MCR12 Media Conversion Rack-Mount Chassis
Fully EU RoHS and China RoHS compliant
Figure 1. illustrates the front panel of the AT-MC606 VDSL Network
Extender.
Ethernet
Status
LEDs
10Base-T/
100Base-TX
LNK/ACT
100M
PWR
AT-MC606
VDSL EXTENDED ETHERNET
Ethernet Port
Power LED

Figure 1. AT-MC606 Front Panel

VDSL Configuration
Switches
VDSL CONFIG
SCBR FAST ASYM 6dB
VDSL LINE
PROV INTL SYM 9dB
Coaxial VDSL
Line Port
Subscriber/
Provider LED
SCBR
PROV
LINK
RATE
1931
VDSL Line
LEDs