Connectors And Leds - Network Technologies XTENDEX ST-C6USBH-300 Operating Manual

NTI XTENDEX 300 Foot HDMI and IR Extender

CONNECTORS AND LEDS

#
LABEL CONNECTOR
1 24VDC- 1.0A 1.0mm Power Jack
2 IR Out 3.5mm Stereo Jack
RJ45 connector
3 CATx
4 Yellow LED --
5 Green LED --
HDMI female video
6 HDMI In
connector
7 USB CPU USB Type B female
8 IR In 3.5mm Stereo Jack
9 HDMI Out HDMI female video
connector
10 MAC MODE --
USB Type A female
11 SUPPORTED USB
DEVICES
DESCRIPTION
connection jack for the AC adapter (only the Local or the Remote Unit
needs to be powered, not both)
for connecting the IR Emitter (models with IR support only)
for connecting the CAT5e/6/6a/7 cable between the Local and Remote
units
traffic indicator- illuminates when there is communication between the
local and remote units.
power indicator- illuminates when power has been supplied to the unit
for connecting an HDMI cable between the Local Unit and the video
source
for connecting a USB port from the computer for keyboard and mouse
control
for connecting the IR Receiver (models with IR support only)
for connecting the remote display device
LED that will illuminate when the extender is configured to connect to a
MAC CPU (see page 9)
for connection of a USB Keyboard and Mouse (2 Port Models).
When extra port (3 total) is present a USB touch screen monitor,
interactive whiteboard, or CAC card reader may be connected
3