Infrared Control; Figure 5- Connect Ir Emitter And Receiver (Models With Ir Support Only) - Network Technologies XTENDEX ST-C6USBH-300 Operating Manual

NTI XTENDEX 300 Foot HDMI and IR Extender

INFRARED CONTROL

Model ST-C6USBH(U)-IR-300 includes ports for connecting an infrared emitter and receiver (included) to work in conjunction with
the IR remote control used to operate the CPU.
the "IR OUT" port on the Local unit. Position the end of the receiver such that the signal from the remote control can easily reach
the IR sensor. Position the end of the emitter such that the extended signal can be sent to the CPU.
Note: The IR Emitter and Receiver work within a frequency range of 33-40kHz. Check the
specifications for the device you are extending to make sure the XTENDEX will work with it.
3.5MM Stereo Plug
3.5MM Mono Plug

Figure 5- Connect IR Emitter and Receiver (models with IR support only)

Connect the receiver to the "IR IN" port on the Remote Unit and the emitter to
IR-RCVR-3
IR-EMTR-3
8
IR Receiver
IR Emitter