Position Light Bulb Replacement - Triumph Trophy Handbook

Position Light Bulb Replacement

chtc
1. Position light bulb
The position light is fitted to the underside of
the headlight, behind the headlight trim
panel.
To Replace the Bulb:
Disconnect the battery, negative (black) lead
first (see page 144).
Remove the two fixings and detach the
headlight trim panel (located below the
headlight) by sliding it forwards.
Maintenance and Adjustment
Disconnect the ambient air temperature
sensor connector and remove the trim panel.
1
2
chtu
1. Headlight trim panel
2. Fixings
3. Removal direction
4. Ambient air temperature sensor
location
Rotate the bulb holder anti-clockwise to
release it.
Replace the bulb.
Installation is the reverse of the removal
procedure, noting the following:
• Reconnect the ambient air temperature
sensor connector.
• Refit the headlight trim panel, ensuring
the hooks on the panel engage in the
slots on the underside of the headlight.
Tighten the fixings to 3 Nm.
• Reconnect the battery, positive (red) lead
first (see page 144).
3
1
4
2
155