Table of Contents
Advertisement
1-3
Chassis Features
System Power
When confi gured as a SuperServer 5016I-MT/5016I-MTF, the SC813MTQ-350
chassis includes a single 350W power supply.
SATA Subsystem
The SC813MTQ-350 chassis was designed to support four SATA hard drives,
which are hot-swappable units.
Note: The operating system you use must have RAID support to enable the
hot-swap capability of the SATA drives (system-based RAID is not available for
SATA).
Control Panel
The SC813MTQ-350's control panel provides important system monitoring and
control information. LEDs indicate power on, network activity, hard disk drive activ-
ity and system overheat conditions. The control panel also includes a main power
button and a system reset button. The front of the chassis also includes a COM
port and two USB serial ports for easy access.
Cooling System
The SC813MTQ-350 chassis has an innovative cooling design that features three
4-cm high-performance system cooling fans. Each of these fans plug into a chassis
fan header on the motherboard. An air shroud channels the airfl ow generated by
the fans to effi ciently cool the processor area of the system.
A fan speed control setting in BIOS allows fan speed to be determined by system
temperature [the recommended setting is 3-pin (Server)].
Chapter 1: Introduction
1-3
Advertisement
Table of Contents
