Table of Contents
Advertisement
S
S
UPER
ERVER 5016I-MT/5016I-MTF User's Manual
5-4
I/O Ports
The I/O ports are color coded in conformance with the PC 99 specifi cation. See
Figure 5-2 below for the colors and locations of the various I/O ports.
2
1
1. Keyboard (Purple)
2. PS/2 Mouse (Green)
3. USB Port 0
4. USB Port 1
5. IPMI LAN Port*
*X8SIE-F only
5-5
Processor and Heatsink Installation
When handling the processor package, avoid placing direct pressure on
!
the label area of the fan.
Notes:
•
Always connect the power cord last and always remove it before adding, re-
moving or changing any hardware components. Make sure that you install the
processor into the CPU socket before you install the CPU heatsink.
•
If you buy a CPU separately, make sure that you use an Intel-certifi ed multi-
directional heatsink only.
•
Make sure to install the serverboard into the chassis before you install the CPU
heatsinks.
•
When receiving a serverboard without a processor pre-installed, make sure that
the plastic CPU socket cap is in place and none of the socket pins are bent;
otherwise, contact your retailer immediately.
•
Refer to the Supermicro web site for updates on CPU support.
Figure 5-2. I/O Ports
5
4
6
3
6. COM1 Port
7. VGA Port (Blue)
8. LAN1
9. LAN2
5-4
7
8
9
Advertisement
Table of Contents
