Color On Demand Assembly Removal - Lexmark C746n Service Manual

5026
Remove the cable from the six retainers (E).
4.
Installation note: Pay attention to the routing of the cables and the cable retainers.

Color on demand assembly removal

1. Remove the fuser. See
Remove the print cartridges.
2.
Remove the top cover assembly. See
3.
Disconnect the connector at JBOR1 (A) on the system board.
4.
Service Manual
4-70
"Fuser removal" on page 4-110.
"Top cover assembly removal" on page 4-58.
Previous
Next
Go Back