5026
Motor
Cam
COD
Print Tests
Input source tests
The purpose of the diagnostic Print Tests is to verify that the printer can print on media from each of the installed
input options. The contents of the Print Test Page varies depending on the media installed in the selected input
source.
Check each Test Page from each source to assist in print quality and paper feed problems.
To run the Print Test Page:
Select PRINT TESTS from the Diagnostics Menu.
1.
Select the media source.
2.
Tray 1
Tray 2 (if installed)
Tray 3 (if installed)
Tray 4 (if installed)
Tray 5 (if installed)
Multi-Purpose Feeder (if installed)
Select Single or Continuous.
3.
If Single is selected, a single page is printed.
•
If Continuous is selected, printing continues until
•
Service Manual
3-12
Direction
Action
Forward
Engage motor couplings
Reverse NOP
Disengage motor couplings
Forward
Engage color cartridges
Reverse NOP
Disengage color cartridges
Notes
• Runs to stall position
• Locks door
• Enables print operations
• Runs to stall position
• Unlocks door
• Disables printing
• Runs to stall position
• Disables color print operations
• Runs to stall position
• Enables color printing
is pressed to cancel the test.
Previous
Next
Go Back