Troubleshooting; Part List / Replacement - Windster H30SS User Manual

TROUBLESHOOTING

12
TROUBLESHOOTING
WARNING!!!
Check to make sure all power sources are disconnected
before starting any troubleshooting. Safety gloves and glasses
should be worn when working on the unit. Serious injury or death
may occur if safety precautions are not followed.
H Series
Light Issue (All not 1. Halogen lights may need to be changed.
turning on) 2. New Transformer replacement is required.
1. Check all wiring to and from the unit.
LED light issue
2. LED may require new fixture or transformer.
Light Issue (One light
1. LED light may be defected.
not turning on)
1. Ensure wires are properly connected
Lights Flickering
2. Replace light if defected.
Burnt/melted control
1. Complete Control switch replacement is required.
switch
Speed levels not 1. Check all wiring to and from the unit.
working correctly 2. Complete control switch replacement is required.
1. Check ducting for foreign object.
Unit lacking smoke
2. Ensure the ducting is properly sealed.
intake
3. Clean filters to increase airflow.
Unit showing no power 1. Make sure the power source is working properly.
indication 2. All wiring is connected.
Unit making humming
1. Replace defective capacitor with new one.
noise

PART LIST / REPLACEMENT

PART LIST / REPLACEMENT
# Description
1 Duct cover bracket
2 Duct cover
3 Hood bracket
4 Hood body assembly
5 30" / 36" glass
6 LED lights
# Description
7 Control switch
8 Transformer
9 Capacitor
10 Transition collar
11 Squirrel cage motor
12 Aluminum filter x 1
13