Removable/Adjustable Seat (F-Series/Z1 Models) - Arctic Cat S2009F5DFCUSG Operator's Manual

1. With the seat adjuster lever pulled
out, slide the front of the seat into
position on the chassis; then with
seat position selected, lower the
rear of the seat onto the rear stor-
age compartment.
2. Press down on the rear of the seat;
then secure the seat by releasing
the seat adjuster lever.
3. With the seat adjusted to the low-
est position, install the self-tapping
screw into the right side of the seat
support assembly.
! WARNING
Make sure the self-tapping screw
is securely tightened and the seat
is securely locked in place or per-
sonal injury may result.
To adjust the seat, use the following
procedure:
1. Remove the rear seat.
2. Pull up on the operator seat
adjuster.
3. Lift up on the back of the seat;
then move the front of the seat up
or down into one of the seven
available positions.
4. Press down on the rear of the seat;
then secure the seat by releasing
the seat adjuster.
GENERAL INFORMATION
5. Install the rear seat.
Make sure the seats are securely
locked in place or personal injury
may result.
REMOVABLE/
ADJUSTABLE SEAT
(F-Series/Z1 Models)
These snowmobiles are equipped with
a removable/adjustable seat. To adjust
the seat, use the following procedure:
1. Press in on the left-end of the seat
adjuster lever at the rear storage
compartment; then pull out on the
seat adjuster lever at the rear stor-
age compartment.
2. Lift up on the back of the seat;
then move the front of the seat up
or down into one of the seven
available positions.
Do not use the adjuster lever to lift
0742-592
the seat.
3. Press down on the rear of the seat;
then secure the seat by releasing
the seat adjuster lever.
Make sure the seat is securely
locked in place or personal injury
may result.
To remove the seat, use the following
procedure:
! WARNING
! CAUTION
! WARNING
741-434A
25