Removable/Adjustable Seat (F5 Lxr Model); Towing - Arctic Cat Bearcat 570 2012 Operator's Manual

Touring/trail/utility
Table of Contents

Advertisement

2. Place the winch in the desired posi-
tion; then secure it with the hairpin
clip and the receiver pin.
NOTE: When operating the snow-
mobile, always have the winch in the
tunnel mounting location secured with
the hairpin clip and the receiver pin.
Removable/Adjustable
Seat (F5 LXR Model)
This snowmobile is equipped with a
removable/adjustable seat. To adjust the
seat, use the following procedure:
1. Press in on the left-end of the seat
adjuster lever at the rear storage
compartment; then pull out on the
seat adjuster lever at the rear storage
compartment.
2. Lift up on the back of the seat; then
move the front of the seat up or
down into one of the seven available
positions.
CAUTION
Do not use the adjuster lever to lift
the seat.
3. Press down on the rear of the seat;
then secure the seat by releasing the
seat adjuster lever.
! WARNING
Make sure the seat is securely locked
in place or personal injury may result.
To remove the seat, use the following
procedure:
1. Adjust the seat to the lowest posi-
tion; then while lifting on the top
forward part of the seat, remove the
self-tapping screw from the right
side of the seat support assembly.
2. Press in on the left-end of the seat
adjuster lever at the rear storage
compartment; then pull out on the
seat adjuster lever.
3. Lift on the back of the seat and move
it forward and upward to remove it
from the chassis.
Do not use the adjuster lever to lift
the seat.
To install the seat, use the following pro-
cedure:
1. With the seat adjuster lever pulled
out, slide the front of the seat into
position on the chassis; then with
seat position selected, lower the rear
0744-465
of the seat onto the rear storage com-
partment.
2. Press down on the rear of the seat;
then secure the seat by releasing the
seat adjuster lever.
3. With the seat adjusted to the lowest
position, install the self-tapping
screw into the right side of the seat
support assembly.
Make sure the self-tapping screw is
securely tightened and the seat is
securely locked in place or personal
injury may result.

Towing

If the snowmobile is to be towed by
another snowmobile, do not tow using
the loops in the skis. The tow rope should
be attached to the spindles.
CAUTION
! WARNING
741-718A
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents