Mount Shade In Brackets - Lutron Electronics Serena Installation Manual

Serena Remote-Controlled Shades
®
Insulating Honeycomb Shades
Motorized shade with wireless radio frequency (RF) control.
Installation Guide—Please Read Before Installing

2.3 Mount Shade in Brackets

Holding the shade in both hands, tilt the top of the shade slightly toward the window and hook
the front edge into the brackets behind the battery release tabs (
of the headrail up and press the bottom of the headrail firmly until you hear it click into place.
IMPORTANT: Be certain no fabric cells are caught in the brackets.
bracket
hook
front
edge
end cap
omitted
for clarity
PUSH).Then rotate the back
4
Lutron Electronics Co., Inc., 7200 Suter Road, Coopersburg, PA 18036-1299, U.S.A.
English
Printed in the U.S.A. 8/13 P/N 368-3194 Rev. B