Swing Arm - Arctic Cat 2006 DVX 400 Service Manual

2. Turn the adjuster two full turns counterclock-
wise for the "standard" setting.

Swing Arm

NOTE: Critical torque specifications are located
in Section 10.
REMOVING AND DISASSEMBLING
1. Secure the ATV on a support stand to elevate the
wheels and to release load on the suspension.
! WARNING
Make sure the ATV is solidly supported on the sup-
port stand to avoid injury.
2. Remove the swing arm guard (1); then remove
the rear arm guard (2).
3. Remove the rear arm (3); then remove the front
arm (4).
Back
SP337
SP338
Back to TOC
4. Remove the shock absorber; then remove the
rear wheels.
5. Remove the axle housing (see Section 6).
6. Remove the brake hose guide (1); then remove
the parking brake cable guide (2).
Back to Section TOC
SP339
SP340
7
SP341
Next
7-7