Settings For Connection Of Navigator - Furuno GP-150 Installation Manual

8. MENU SETTINGS
Enlarging characters
The size of the indications of position or user
defined display areas can be enlarged on the
Data display.
1) On the Data display, with no enlarged
characters, press the CURSOR ON/OFF
key to turn on the zoom icon.
2) Operate the cursor keys to select data to
enlarge in the window.
3) Press the ZOOM IN key.
To switch character size from enlarged to
normal, press the ZOOM OUT key at step 3.
Position
SEP 12, 2003 23:59'59" U
12° 23.456' N
POSITION
123° 23.456' E
WGS84
RNG BRG
223.4°
31.23
nm
SOG COG
12.3
123.4°
kt
User-defined
display window
ZOOM
OUT
SEP 12, 2003 23:59'59" U
°
N12
23.456'
°
E123
23.456'
Figure 8-7 How to enlarge indications on the
data display
8-6
D3D 100m
SAFE
TO : 001
MARINE
POINT1
: 002
NEXT
MARINE
POINT2
Zoom icon
ZOOM
IN
D3D 100m
SAFE
POSITION
WGS84
8.4 Settings for Connection
of Navigator
Besides its fundamental function of
displaying position, the GP-150 can also
output various data to external equipment.
Before outputting data to external equipment,
first determine what data the external
equipment requires. Output only necessary
data to ensure data will be output correctly.
All data transmitted by marine electronics
equipment are prefixed with a two character
code called a talker. The same talker must
be shared by the transmitting and receiving
equipment to transmit and receive data
successfully. The GP-150 transmits data
using the GP (GPS talker), however it can
also transmit using the Loran (LC) or Decca
(DE) talker.
Because the GP talker is a relatively new
system some early model equipment may
not recognize this talker.
DATA 1 output setting
1) Press MENU ESC, 9 and 3. The DATA 1,
3 OUTPUT SETUP menu appears.
DATA 1, 3 OUTPUT SETUP
Data Fmt. V1.5
Talker ID GP
Output Data (00-90 sec)98%
1. AAM:00 APA:00
2. BWR:00 BWW:00 GGA:00 GLL:01
3. RMB:01 RMC:00 VTG:01
4. VDR:00 WPL:00
5. GNS:00 GBS:01
DATA3. Log Pulse
ENT : Enter
Settings shown here are default settings.
This line appears only when LOG is
selected by internal jumper wires.
Figure 8-8 DATA 1, 3 OUTPUT
SETUP menu
2) Press or to select Data Fmt.
V2.0 IEC
LC DE
APB:04 BOD:00
WCV:00
XTE:00 ZDA:01
Rnn:00 RTE:00
200ppm 400ppm
MENU : Escape