Navigator Setup; Navigation Data Source - Furuno 1824C-BB Operator's Manual

5. Rotate the ENTER knob to select a main screen, then press the ENTER knob. For
example, select the radar display. Your choice is then shaded to show that is has been
selected.
Hot page setup menu, SPLIT X 3 screen, sub screen selection
6. Rotate the ENTER knob to select the screen to show at the top right 1/4 screen, then
press the ENTER knob or the C: ENTER soft key.
7. Rotate the ENTER knob to select the screen to show at the bottom right 1/4 screen,
then press ENTER knob or the C: ENTER soft key.
Note: The A: SELECT WINDOW soft key functions to select the window to process.
8. Press the MENU key to close the menu.
7.7

Navigator Setup

This section provides the information necessary for selecting the type of navigator
connected to your plotter.

7.7.1 Navigation data source

The NAV SETUP menu mainly selects the source of nav data. For GPS receiver other than
a FURUNO BB GPS receiver, speed averaging and local time offset (to use local time) are
also available. Press the MENU key followed by the E: SYSTEM CONFIGURATION, B:
NAV OPTION and A: NAV SOURCE SETTINGS soft keys to display this menu.
POSITION SOURCE
SPEED(STW) SOURCE
TEMPERATURE SOURCE
DE`PTH SOURCE
STW CALIBRATION
TEMP CALIBRATION
DEPTH CALIBRATION
WIND AVERAGING
WIND DIRECTION OFFSET
WIND SPEED CALIBRATION 00
WIND(MWV) SOURCE
STW TEMP
12.3 kt 56.3°F
WIND SPEED
WIND DIR
1.2 kt
131°
HOT PAGE 1
PLOTTER
RADAR
COMPASS HIGHWAY
NAV
ALL
SETUP1
ETR
ETR
EDIT
ETR
0%
°
+0.0 F
+0.0ft
5 minutes
NEXT
°
P0.0
PAGE
°
F
FURUNO BB GPS
DEPTH RETURN
99.5ft
Page 1
7. CUSTOMIZING YOUR UNIT
SOUNDER
Sub screen
EXT VIDEO
AIR TEMPERATURE SOURCE
AIR PRESSURE SOURCE
NAV
FURUNO BB GPS
SETUP2
FURUNO BB GPS
EDIT
PREV>
PAGE
Page 2
7-23