Selecting Mark Shape; Connecting Marks (Selecting Mark Connection Line) - Furuno GP-150 Installation Manual

3.2

Selecting Mark Shape

13 mark shapes are available. Select mark
shape as follows:
1) Press MENU ESC and 2 to display the
TRACK/MARK SETUP menu.
TRACK/MARK SETUP
Track Rec
Time
(01'00)
Mark Shape
Mark Line
Event Mark
: Select
ENT: Enter
Figure 3-4 TRACK/MARK SETUP menu
2) Press or to select Mark Shape.
3) Press to select mark shape
desired.
4) Press the NU/CU ENT key.
5) Press the MENU ESC key.
The next mark entered will be inscribed in the
shape selected here.
3-2
Dist
(00.50nm)
MENU: Escape
3.3 Connecting Marks
(selecting mark connection
line)
Marks can be connected with lines. Three
types of connection lines are available and
the "•" setting disables connection of lines.
1) Press MENU ESC and 2.
2) Press or to select Mark Line.
3) Press to to select mark line desired
other than "•".
4) Press the NU/CU ENT key.
5) Press the MENU ESC key.