System Configuration - Furuno Mu-190HD Operator's Manual

SYSTEM CONFIGURATION

MARINE DISPLAY
12-24 VDC
Equipment
FCV-1200L/M
CH-250/S
CH-270
CH-300
CSH-5L/8L
FSV-24/S-BB
FSV-30/S-BB
FSV-84/L
FCV-30
CI-68/88
FR-1510MK-3
FR-21x5 series
FAR-21x7 series
FEA-2107
FEA-2807
FCR-21x7 series
FCR-28x7 series
MODEL1833C series (NAVnet)
MODEL1833C-BB series (NAVnet)
MFD8 (NAVnet3D)
MFD12 (NAVnet3D)
MFDBB (NAVnet3D)
Note 1: This equipment is used as a display for a Non-SOLAS radar or ECDIS.
Note 2: Landscape orientation only.
Note 3: When inputting VGA, SVGA or XGA, a circle may be displayed as an ellipse because the
aspect ratio differs. (see "DISP MODE*" on page 17.)
RGB
DVI
2 ports
VIDEO (NTSC/PAL)
3 ports
MU-190HD
Connectable equipment
MODEL1833C/1943C,
FSV-30, FCV-30, FCV-1200L etc.
MFD8/MFD12/MFDBB,
FAR-21X7 series etc.
CCD camera,
DVD recorder, etc.
Environmental category
MU-190HD: Protected from the weather
Resolution
VGA Analog RGB, via IF-8000
VGA Analog RGB, via IF-8000
VGA Analog RGB, via IF-8000
VGA Analog RGB, via IF-8000
XGA Analog RGB
SXGA Analog RGB
SXGA Analog RGB
SXGA Analog RGB
SXGA Analog RGB
VGA Analog RGB
XGA Analog RGB, OP03-153 required
SXGA Analog RGB, OP03-162 required
SXGA DVI
SXGA DVI
SXGA DVI
SXGA DVI
SXGA DVI
VGA Analog RGB, OP03-176 required
VGA Analog RGB
VGA DVI
SVGA DVI
SVGA
XGA DVI
SXGA
vi
Signal