Flush Mounting (Fix At Rear) - Furuno Mu-190HD Operator's Manual

1. MOUNTING, WIRING
1.2

Flush Mounting (fix at rear)

Flush mounting, fix at rear is the standard installation method.
1. Make a cutout in the mounting location with the "Flush mounting template" (included).
2. Attach the flush mounting sponges H19 and V19 in the order shown in the figure below.
Flush Mounting Sponge (V19)
for right and left
3. Connect all cables at the back of the display unit. See section 1.7.
442±1 (17.40")
4-ø18 (0.71")
9 (0.35")
Flush Mounting Sponge (H19)
for top and bottom
3