Final Installation; Glass Frame Removal - Vermont Castings KSTDV500(N/P)TSCSB Installation And Operating Instructions Manual

Kstdv series direct vent gas fireplace
Table of Contents

Advertisement

FINAL INSTALLATION

GLASS FRAME REMOVAL

NOTE: You must fi rst remove the safety barrier before
you remove the glass frame. To remove the barrier, lift
up and pull out until the tabs are clear of their corre-
sponding slots on the fi rebox. Then proceed to remove
the glass frame by:
1. Remove the plate located in front of the glass at the
bottom.
2. Remove rod provided for screen assembly located
beneath the cover plate.
3. Rotate the access doors on the right and left side of the
glass toward the glass.
4. Remove glass frame by releasing the three latches
located at the top of the fi rebox. Tilt glass away from the
unit, lift glass frame up and away from the unit. Figure
33
Safety Barrier
Figure 33 -
Remove Safety Barrier and Glass Frame
20306743
Glass Frame
KSTDV Series Gas Fireplace
Each clamp has a quick spring force. When
reinstalling clamps, keep fi ngers clear.
DANGER
A barrier designed to reduce the risk of burns from the hot
viewing glass is provided with this appliance and shall
be installed for the protection of children and
other at risk individuals.
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
20306543
27

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kstdv500ntscKstdv500ptsc

Table of Contents