Voip Telephony Functions - Edge-Core VG007 Installation Manual

Edge-core pocket voip gateway installation guide
Hide thumbs Also See for VG007:
Table of Contents

Advertisement

VoIP Telephony Functions

The Pocket VoIP Gateway can function as a VoIP gateway for making telephone
calls over the Internet. Using the Internet to make VoIP calls to any other VoIP user
in the world is essentially free, and even calls to regular PSTN (Public Switched
Telephone Network) phones are much cheaper than making a traditional long
distance calls.
The Pocket VoIP Gateway enables VoIP calls to be made using a regular (analog)
telephone set, as well as a PC or VoIP phone. The regular telephone can also be
used to make PSTN calls through the Pocket VoIP Gateway.
The Pocket VoIP Gateway uses standard Session Initiation Protocol (SIP)
technology to make VoIP calls. When you have connected the unit in either gateway,
access point, wireless client, or repeater mode, use the web management interface
to set up the SIP parameters. Refer to the Management Guide for more information
on VoIP and SIP.
Pocket
VoIP Gateway
(Default IP 192.168.7.1)
Public Switched
Telephione
Network (PSTN)
Wireless
VoIP Phone
1
Connect
LINE port
to PSTN jack
Standard
(Analog)
Telephone
VoIP Telephony Functions
3
Connect to web
interface from PC
and use Setup Wizard
to configure VoIP
and SIP settings
2
Connect
PHONE port
to standard
telephone
Notebook PC
Cable/DSL
Modem
Internet
2-5

Advertisement

Table of Contents
loading

Table of Contents