Table of Contents
Advertisement
RJ-11 Ports
Standard telephone RJ-11 connectors and cabling can be found in several common
wiring patterns. These six-pin connectors can accommodate up to three wire pairs
(three telephone lines), but usually only one or two pairs of conductor pins and wires
are implemented.
The RJ-11 ports on the side of the Pocket VoIP Gateway contain only one wire pair
on the inner pins (3 and 4).
1
2
3
4
5
6
Red or
Blue/White
1 2 3 4 5 6
R = Ring
Pin
Signal Name
Not used
Not used
Line 1 Ring
Line 1 Tip
Not used
Not used
Green or
White/Blue
R T
T = Tip
Wire Color
Red or Blue/White
Green or White/Blue
RJ-11 Ports
B-3
Advertisement
Table of Contents
