Table of Contents
Advertisement
Connecting the Pocket VoIP Gateway
Pocket
VoIP Gateway
(Default IP 192.168.7.1)
Internet
To connect the Pocket VoIP Gateway for use as an access point, follow these steps:
1.
Connect an Ethernet cable from the Pocket VoIP Gateway's LAN or WAN port
to your local network switch.
2.
Power on the Pocket VoIP Gateway by connecting the AC power adapter and
plugging it into a power source.
3.
From a PC on the local network, use a web browser to access the Pocket VoIP
Gateway's user interface and run the Setup Wizard to configure the access
point service (refer to the Management Guide for details). The Pocket VoIP
Gateway has a default IP address of 192.168.7.1 and a subnet mask of
255.255.255.0. If the default IP address is not compatible with the local
network, you can first configure the Pocket VoIP Gateway from a direct
connection to a PC before installing the unit in the network.
2-4
1
Connect
LAN or WAN
port to Ethernet
LAN switch
3
Connect to web
interface from LAN
PC and use Setup
Wizard to configure
access point service
Notebook PC
2
Connect
AC power
adapter to
power source
Server
Desktop PC
Advertisement
Table of Contents
