Table of Contents
Advertisement
Chapter 2: Connecting the Pocket VoIP
Gateway
In its default setting, the Pocket VoIP Gateway's operating mode is determined by
how it is connected. The Gateway and Wireless Client modes are automatically
implemented depending on the WAN port connection. The Access Point mode, as
well as VoIP functions, require manual configuration using the Pocket VoIP
Gateway's web management interface.
The connections for each operating mode are described in the following sections.
For detailed information on the web management interface, refer to the
Management Guide.
Internet Gateway
Used as a gateway, the unit routes traffic between an Internet connected cable or
ADSL modem, and wired or wireless PCs or notebooks.
Pocket
VoIP Gateway
(Default IP 192.168.7.1)
Internet
To connect the Pocket VoIP Gateway for use as an Internet gateway, follow these
steps:
1.
Connect an Ethernet cable from the Pocket VoIP Gateway's WAN port to your
Internet connected cable or ADSL modem.
2.
Connect an Ethernet cable from the Pocket VoIP Gateway's LAN port to your
PC. Alternatively, you can connect to a workgroup switch to support multiple
users. The Pocket VoIP Gateway can support up to 32 wired or wireless users.
1
Connect
WAN port
to Cable/DSL
modem
Cable/DSL Modem
3
Connect
AC power
adapter to
power source
2
Connect
LAN port
to PC
Notebook PC
2-1
Advertisement
Table of Contents
