Rear Panel Connections - Winegard 2-WAY SATELLITE INTERNET SYSTEM Product Manual

6.2 - Rear Panel Connections

1. Ethernet Ports -
The controller features a 3 port 10/100 switch.
2. Mini USB Port -
The USB Mini Port is a client port utilized at the factory.
3. USB Host Port -
Available to connect USB devices such as a Keyboard or Mouse.
4. Serial RS232 Output Port -
The Serial port is used for engineering debugging purposes only.
5. ODU Power/Communication Cable (ODU) -
The Control Cable port is either a TNC or F (male) connector. F connector shown.
6. AC Power Plug -
The system is supplied with a UL listed 120VAC power cord. See section 4.7 for
power cord specifications. The power cord must be connected to a grounded
socket-outlet protected by a 20 amp fuse or circuit breaker. The power cord is the
disconnecting device. The socket-outlet for the power cord shall be installed near
the equipment and be easily accessible. If the IDU is installed in a rack
accessibility must be provided to the power cord or to the fuse or circuit breaker
for disconnection.
7. Remote -
Connection for a remote status indicator.
8. Fuse -
5A 32V Fast Acting Type ATF
Winegard P/N 2320020
9. Model/Serial Number Label
This label contains the model number a serial number of the IDU.
This label contains logos for all agency certifications.
9
6
6
1
3
2
4
7
5
8
P a g e |
24