Winegard 2-WAY SATELLITE INTERNET SYSTEM Product Manual page 38

MODEM Search - The controller searches for the target satellite based on
feedback from the modem for carrier acquisition and carrier SNR.
This mode has a larger search window and moves across the Azimuth plane at a
slower rate.
Notice that the use of a PLL LNB is required when performing a MODEM search.
DVB Search - The controller searches for the target satellite based on feedback
from our internal tuner frequency and symbol rate lock.
Once the system has acquired the target satellite, the controller will make a
request of the modem to ensure that it is also locked onto its corresponding
carrier.
This search is good for verification of satellite lock if perhaps the modem has the
wrong carrier information on it.
This search mode has a smaller search window and moves the antenna across
the sky at a faster rate.
For the purpose of this manual, select "MODEM" and the screens associated with
that selection will be described.
The SATELLITE SETTINGS screen displays the Longitude, Hemisphere and Rx Polarization
of the target satellite.
When you enter this screen on the first installation, the data here will be the default
longitude and polarization from the factory.
The target settings can be changed by tapping on the white section of the screen.
P a g e |
38