Winegard 2-WAY SATELLITE INTERNET SYSTEM Product Manual page 44

The HEADING screen changes some of its information depending on the current
Heading mode.
1. HEADING SCREEN (Compass Mode) -
Notice the CALIB button is enabled and the mode next to the MODE toggle button
shows COMPASS.
The wording, above the MODE button, states that a Compass Calibration is currently
required and the True Heading display shows a very accurate heading.
2. HEADING screen Fixed Heading Mode -
Notice the CALIB button is NOT enabled and the mode next to the MODE toggle
button shows FIXED.
The wording, above the MODE button, states that the system is in Fixed Mode and
requests to select the direction of the stowed antenna using the compass to the right
of this section.
Notice the rough heading in the True Heading display.
P a g e |
44