Winegard 2-WAY SATELLITE INTERNET SYSTEM Product Manual page 48

2. The controller will enter the HEADING screen. (See page 40)
Look at the Compass Mode and choose a path below:
A. If the controller is currently set to FIXED heading mode, proceed to step
3.
B. If the controller is currently set to COMPASS mode, tap the "MODE"
button to switch the controller to FIXED mode then proceed to step 3.
3. As long as the controller is in FIXED mode, the sections of the compass above
and to the right of the compass screen will be available to manually set a
heading.
Tap on the direction the face of the reflector is facing when the system is
stowed. This will set the True and Rough headings to the correct heading.
Alternately you can also tap on the true heading display and enter an exact
heading value.
Unlike calibrating the compass, the Fixed heading process works the same
for all Winegard antennas.
P a g e |
48