Wx Series Description & Installation; Antenna Mount - Main Assemblies - Winegard 2-WAY SATELLITE INTERNET SYSTEM Product Manual

5. WX Series Description & Installation

5.1 Antenna Mount - Main Assemblies

7. Reflector -
The WX1200 and WX980 antennas use a Prodelin reflector.
8. Elevation Actuator -
The elevation actuator is attached to the Reflector back plate and Main Drive
Mechanism
9. Main Drive Mechanism -
Houses the AZ motor, AZ ring gear, ODU and wiring.
10. Installation Rails -
These are used to secure the antenna to the vehicle or mobile structure. Hole
patterns for installation are available on the dimension documents at the end of
this manual.
11. Feed Arms -
Houses the Universal BUC mounting plate which can be used to mount the user
supplied BUC. The BUC can have a maximum size of 12.00" L x 7.75" W x 5.5" H
and maximum weight of 15 lbs.
12. Skew Assembly -
Houses the Skew drive motor, Feed assembly, user supplied LNB and Flex Wave
Guide
13. Wiring Plate -
The Power/Communication cable (from IDU), Transmit cable and Receive cable
(from modem) connect to the Antenna Mount Wiring Plate.
1
2
3
7
6
5
4
P a g e |
16