Mpeg-4 upgrade for trav’ler shaw direct antenna sk-7003 (12 pages)
Summary of Contents for Winegard SK-1000 Trav'ler
Page 1
DO NOT RETURN ANTENNA TO PLACE OF PURCHASE For up-to-date information on receiver compatibility and programming, visit www.winegard.com/receivers Product Registration Please register your Winegard product by filling out and returning the Product Registration Card provided or by completing the online registration form at http://www.winegard.com/registration 2452238...
Congratulations! Specifications You have selected the Winegard ® TRAV’LER Automatic Multi-Satellite TV Antenna. The SK-1000 ® TRAV’LER antenna will deliver the ability to view up to three satellites at the same time with unmatched signal strength, the lowest travel height on the market, maximum HD capabilities and easy to use functionality—just like you get at Height (stowed): 9.75 in...
24” AC power cord 30’ Gray Coax Cable 30’ Black Coax Cable For cable runs longer than 30’, an extension may be purchased. Winegard recommends using Model CL-SK26 25’ extension cable. Reflector Bolt (4) Do not exceed 55’ of cable.
TRAV’LER interface box, and attach the AC power cord to the TRAV’LER power supply. Figure 9 SKA-004 When installing the TRAV’LER antenna on a rubber roof, Winegard recommends using the 110 V outlet Back of TRAV’LER Interface Box SKA-004 Roller Plate, which is designed to create a solid landing area for the roller.
If a defect in material or workmanship is discovered, Customer may take the product to an authorized Winegard dealer for service. Customer must provide proof of purchase to verify the product is under warranty. If the product is brought to an authorized Winegard dealer for service prior to expiration of year one (1) of the warranty period and a defect in material or workmanship is verified by Winegard Technical Services, Winegard Company will cover the Winegard dealer’s labor charges for warranty service.
Page 6
DO NOT RETURN ANTENNA TO PLACE OF PURCHASE For up-to-date information on receiver compatibility and programming, visit www.winegard.com/receivers Product Registration Please register your Winegard product by filling out and returning the Product Registration Card provided or by completing the online registration form at http://www.winegard.com/registration 2452238...
The instructions below assume that the TRAV’LER antenna is already in the stowed position. Note: this antenna searches for satellites. For steps on how to set up the TRAV’LER antenna for Bell TV, see pages 3–4. function is rarely used. WINEGARD COMPANY Enter User Menu? WINEGARD COMPANY...
Operation for Bell TV Users Operation for Bell TV Users SM ExpressVu WINEGARD COMPANY connecting to Installation* Success POWER ON antenna SM DTV Triple The TRAV’LER interface box will display Press and hold [POWER] for two Now that the power is on, release the...
‘OK’ status You are now ready on Satellite 110, to watch TV! 119, 129. Operation Operation Disclaimer: Receiver setup instructions are accurate at time of printing and may change without notice. Call Winegard tech line for assistance at 1-800-788-4417.
Contact Winegard Technical Support at 1-800-788-4417. AZ MOTOR STALLED Something is preventing the TRAV’LER mount from rotating; look for obstructions. If no obvious obstruction, contact Winegard Technical Support at 1-800-788-4417. EL MOTOR STALLED Something is preventing the TRAV’LER mount from raising or lowering; look for obstructions.