Table of Contents
Advertisement
Remove the grommets from the connections...
Lift off the tank cover...
Undo the Sky jacket zip and remove the jacket...
Remove both insulation shells and put them in a safe
place.
al
We reserve the right to make technical changes
NOTICE
Please note that all components must be
reassembled in the reverse order!
WARNING!
Make sure you secure the tank against
slipping during transport. Always secure
the tank on the hand truck with a ratchet
strap!
INSTALLATION
NOTICE
Ensure that the foam insulation is still in
the bottom of the storage tank.
WARNING!
The storage tank must always be tilted by
at least 2 people to prevent the risk of it
tipping over. Do not tilt the storage tank
by more than 20° during this step. Hands
and fingers can be crushed when the tank
is righted!
– Do not grip the bottom of the tank!
– Wear protective gloves!
Before you re-attach the insulation half-shells, check
whether a) the grommets are placed over the pipe
sockets and b) the soft foam sleeve is positioned
over the top connection...
GB830174Ni/210621 – Translation of the operating manual
a) Grommets
b) Sleeve
NIBE
AP-WH7
TM
7
Advertisement
Table of Contents
