Circulation Kit Installation - Nibe AP-WH7 Operating Manual

Re-attach the insulation half-shells to the storage
tank...
Use adhesive tape to fix the insulation half-shells
at the top, bottom and in the middle part of the
tank...
Place the Sky jacket around the storage tank so that
the punched out holes fit over the sockets. Then
close the zip...
CAUTION.
The zip must be closed by two people to
relieve the strain!
Replace the tank cover and push the grommets over
the corresponding pipe connections.
8
NIBE AP-WH7
TM
We reserve the right to make technical changes

CIRCULATION KIT INSTALLATION

NOTICE
The connection between the top and
bottom heat exchanger must always be
installed, even if there is no circulation
pipe!
Seal the two threads (1 and 2)...
Screw the tee onto thread 1 and move into
the correct position (connection part facing
downwards)...
GB830174Ni/210621 – Translation of the operating manu-