Troubleshooting Guide - Viessmann F remote control Operating Instructions Manual

Troubleshooting guide

17 Troubleshooting guide
Fault messages
The display of the F remote control can indicate the follo
wing fault conditions which are shown by the flashing of
the fault symbol:
Sensor fault
If a sensor fault occurs during operation, it is indicated as
follows on the F remote control:
Please note:
When the F remote control is used in conjunction with the
Viessmann Trimatik, the precise source of the fault and the
type of fault can be identified with the aid of the instruc
tions for the control unit.
Cancelling the fault message
In order to return to the normal display (time display), you
can cancel the fault message as follows:
Press the "
fault message is blanked out in the display.
46
Dokument: - page 1 (Black)
Screen angle and frequency: 45.0000, <default>
" and " " buttons simultaneously. The