Viessmann F remote control Operating Instructions Manual page 32

Operation, settings and adjustments
You can re-program the switch-on and switch-off time of
the 2nd activation period of group II as follows:
1. Press the red "
The left-hand arrow flashes, the display shows the pre
sent switch-on time, e.g. - -:- - hrs.
2. At the same time, set the display to the new switch-on
time with the "
3. Release the red "
4. Press the blue "
The right-hand arrow flashes, the display shows the
present switch-off time, e.g. - -:- - hrs.
5. At the same time, set the display to the new switch-off
time with the "
6. Release the blue "
The current time is displayed.
Please note:
The unassigned activation periods 2, 3 and 4 of group I as
well as the activation periods 1, 3 and 4 of group II can be
set in the same way as described above.
32
Dokument: - page 23 (Black)
Screen angle and frequency: 45.0000, <default>
" button.
" selector knob.
" button.
" button.
" selector knob.
" button.