Viessmann F remote control Operating Instructions Manual page 44

Appendix
Room temperature
If the room temperature remains too high during reduced
operation, this will be due to the fact that buildings with
good thermal insulation cool down more slowly. In this
case, you can choose the "
a new temperature value is set, the time it takes for the
newly selected temperature to establish itself in your home
varies according to the thermal insulation characteristics of
the building.
Please note:
If the settings of the F remote control are changed, it takes
approx. 1 minute for the new values to become effective.
Standby mode with frost protection of the heating system
D Set the program selector switch "
tinuous standby with frost protection of the heating
system):
The heating circuit is operated day and night via the
corresponding control unit for frost protection of the
heating system only.
The programmed switch-on and switch-off times are
not effective.
44
Dokument: - page 3 (Black)
Screen angle and frequency: 45.0000, <default>
" heating program. When
" to " " (con