Intelligent Weighing Technology Intell-Count IDC 3 User's Operation Manual page 29

Use U.Wt/Unit to enter the decimal point position
and use the numeric keypad to select and press
Tare
To change the remote scale capacity (SEL), press
CE to clear and then enter the new value followed
by Tare
To select the increment use the numeric keypad,
then press Tare
The display returns to CAp
Press the U.Wt/Unit to go to the next menu.
Press the U.Wt/Unit to go to the next menu, use the
Tare key to enter.
Use U.Wt/Unit to increment the values, then press
Tare.
Press the U.Wt/Unit to go to the next menu.
Press the U.Wt/Unit key to go to the next menu.
Use the Tare key to enter.
Press the U.Wt/Unit key to go to the next menu.
Use the Tare key to enter.
Enter the new PIN number and press Tare
Confirm the new PIN number and press Tare
Press U.Wt./Units to continue or escape the
parameters by pressing Zero
"dESC" " 0.00"
"SEL" "0060"
"inC 1"
"CAp"
"div" weighing division.
"Azt" Autozero
range.
Select from 0.5d 0.5d, 1d, 2,
4,d
"Azt"
"0 Auto" Zero auto range at
power on.
"0 manl" Zero manual range.
"Pin" Password number for
"tEch".
"Pin1"
"Pin2"
"donE"
tracking
- 25-