Section4 Key Descriptions - Intelligent Weighing Technology Intell-Count IDC 3 User's Operation Manual

SECTION 4 KEY DESCRIPTIONS
0-9, •
These keys are used to manually enter a value for tare weights, unit weight and
sample size. A secondary function is to enter alpha-numeric characters for PLU
descriptions etc.
CE
Pressing this key clears the unit weight or an erroneous entry. It also clears the
memory accumulation when the total is displayed.
M+
This key is used to add the current count to the accumulator. It also recalls the
memory when pressed with no load on the scale. Up to 99 values or full capacity of
the weight display can be added. Also prints the displayed values when Auto print is
switched off.
Smpl
This is used to enter the number of items of a sample.
PLU
To store and recall the Piece Look Up sample information.
U. Wt./Units
This key is used to enter the weight of a sample manually. It will also change the
weighing units when other units are enabled.
PST
To set the upper limit for the number of items counted. When this upper limit is
exceeded the scale will sound the beeper. A secondary function is to use it for the
backlight control setting.
Local/Rem
This key is used to select the local or remote scale.
Tare
tares the scale by storing the current weight in the memory as a tare value,
subtracting the tare value from the total weight and displaying the results as a net
weight.
Zero
sets the zero point for all subsequent weighing by setting the display to zero.
- 6 -