Intelligent Weighing Technology Intell-Count IDC 3 User's Operation Manual page 25

This will allow the scale data to be sent from a PC program as well as from the keypad.
The most common PLUs can be stored and recalled from the scale memory. Other
PLU data can be stored on a PC, then the text data, unit weight and tare data can be
sent from the PC to PLU00. This can then be used and over written each operation.
OPERATION:
• Send tare data to set any tare value to be stored with PLU. i.e. "T0.150" <CR>.
If no tare is needed then you may send T0 to delete any present tare data.
• Send the unit weight to be stored with PLU. ie. "U12.3456" <CR>
• Send PLU text data to be stored with current TARE and U/W values. ie.
"SPLU01,Parts" <CR>
- 21-