2
Press and hold down the exposure mode selector key for approximately
5 seconds. The MANUAL (
(
) indicator will begin to blink. The light and dark indicator marked
"5" will light up, indicating the standard toner mode is active.
3
To enter the toner save mode, press the light (
dark indicator marked "1" will light up, indicating the toner save mode is
selected.
4
Press the exposure mode selector key. The PHOTO (
up steadily. The light and dark indicator marked "3" will light up. The toner save mode is now
active.
To return to the standard mode, repeat the procedure but use the dark (
exposure level "5" in step 3.
USER PROGRAMS
The user programs allow the parameters of certain functions to be set, changed, or cancelled as desired.
Setting the power save modes, auto clear time, stream feeding mode and
resolution of AUTO & MANUAL mode
1
Press and hold down the light (
seconds until all the alarm indicators (
2
Use the copy quantity (
preheat mode, 3: auto power shut-off timer, 5: auto power shut-off mode 6: resolution of AUTO
& MANUAL mode). The selected number will blink in the left side of the display.
3
Press the start (
selected parameter number for the program will blink on the right side of the display.
) indicator will go out and the PHOTO
) and dark (
,
) key to select a user program number (1: auto clear time, 2:
) key. The entered program number will be steadily lit and the currently
) key. The light and
) indicator will stop blinking and light
) keys simultaneously for more than 5
,
, ) blink and "
) key to select
" appears in the display.
4-3