Cleaning - Roland VersaCamm SP-540i User Manual

3.
Attach the emptied bottle and reset the discharged-fluid count.

RESET DRAIN
COUNTER

MAINTENANCE
DRAIN BOTTLE

W1200mm
SETUP SHEET
WARNING Never place discharged fluid near open flame.
Doing so may cause fire.
CAUTION
To store discharged fluid temporarily, place it in the included drain bottle or in
a durable sealed container such as a metal can or polyethylene tank, and cap
tightly.
Any spillage or vapor leakage may cause fire, odor, or physical distress.
Dispose of discharged fluid properly, in accordance with the laws in effect in your locale.
Discharged fluid is flammable and contains toxic ingredients. Never attempt to incinerate discharged fluid
or discard it with ordinary trash. Also, do not dispose of it in sewer systems, rivers, or streams. Doing so
may have an adverse impact on the environment.

Cleaning

WARNING
Never use gasoline, alcohol, thinner, or any other flammable material.
Doing so may cause fire.
CAUTION
Before attempting cleaning, switch off the sub power and wait until the platen and
dryer cool (approximately 30 minutes).
Sudden movement of the machine may cause injury, or hot components may cause
burns.
Press .
The screen shown in the figure appears.
Press a second time.
Press to go back to the original screen.
3-1 Daily Care and Maintenance
Pinch rollers
Periodically wipe away any grime. Failure
to clean properly may result in the transfer
of grime to the surface of media.
Grit rollers
Remove buildup of media and other
material using a brush. Never use a
metal brush.
Wipe away any buildup of ink or
grime on the media path.
51