Connecting Cables To The Device; Connecting Power - PaloAlto Networks PA-200 Hardware Reference Manual

Connecting Cables to the Device

Note: The PA-200 firewall uses a combination of passive and active cooling and
needs proper airflow on all surfaces to ensure proper operation. Do not install the
PA-200 firewall in a small, confined space such as a closed shelf or drawer, as this
could lead to insufficient cooling of the device.
Connecting Cables to the Device
Figure 3 shows the PA-200 cable connections. Refer to Table 1 for descriptions of the front
panel interfaces.
Figure 3. Cable Connections for the PA-200 Firewall

Connecting Power

To power the PA-200 firewall:
1. Attach a power cable to the external power supply.
2. Plug the power supply into the PA-200 firewall.
3. Plug the cable into a grounded wall outlet.
10 • Installing the Hardware
Network Management Console
Palo Alto Networks